Ryan Rotary Performance Rx8
RRP Rx8 Rally Car Sponsorship
We are proud to announce that Ryan Rotary Performance will be sponsoring an Rx8 Rally Car in association with Rivet Racing.
We will be posting updates on our dedicated page for this car and will include:
- The Starting before pics and status.
- Build specifications and progress.
- The much anticipated finished product.
- And of course the rally stages itself.
Rx8 Engine Rebuild Services
Click on one the options below for more details.
Standard Plus
The Standard Plus rebuild service. This package will restore your engine to the condition it was when it left the factory. All RRP rebuilt engines come with a 20,000 mile 12 month warranty as standard which can be extended for a further 12 months.
Parts replaced as standard with this build are:
- 6 x OEM Apex Seals
- 12 x OEM Apex Springs
- 12 x OEM Sideseals
- 12 x OEM Sideseal Springs
- 12 x Two Piece OEM Corner Seals
- 12 x OEM Corner Springs
- 12 x Rotor Inner, Outer, Scrapper Springs
- 2 x OEM Needle bearings
- 1 X Pilot Bearing
- 2 X OEM Stationary Bearings
- 2 X Bearing Retaining Screws
- 2 X OEM Rotor Bearings
All necessary seals and gaskets will be replaced
Want something more bespoke? Why not look at our engine build configuration tool and configure you own options and then purchase online!
Engine Build Configuration Tool
Engine only: £1,775 Incl VAT.
Fully fitted service £2,275 Incl VAT.
Street Port
The Street Port engine rebuild has its inlet and exhaust ports enlarged to increase the breathing capabilities of the Renesis engine resulting in increased performance of engine across the entire rev range. A worthy investment other the Standard Plus package.
we have developed our Street-Port package over the years which is considered the bang for buck modification for those seeking a little more power from the Rx8 without any sacrifice in economy or driveability.
All RRP rebuilt engines come with a 20,000 mile 12 month warranty as standard which can be extended for a further 12 months.
Parts replaced as standard with this build are:
- 6 x OEM Apex Seals
- 12 x OEM Apex Springs
- 12 x OEM Sideseals
- 12 x OEM Sideseal Springs
- 12 x Two Piece OEM Corner Seals
- 12 x OEM Corner Springs
- 12 x Rotor Inner, Outer, Scrapper Springs
- 2 x OEM Needle bearings
- 1 X Pilot Bearing
- 2 X OEM Stationary Bearings
- 2 X Bearing Retaining Screws
- 2 X OEM Rotor Bearings
All necessary seals and gaskets will be replaced
Want something more bespoke? Why not look at our engine build configuration tool and configure you own options and then purchase online!
Engine Build Configuration Tool
Engine only: £1,975 Incl VAT.
Fully fitted service £2,475 Incl VAT.
Bridge Port Stage 1 (Aux Bridge)
The Bridge-Port Stage 1 Engine Rebuild or Aux Bridge as its commonly known has its inlet and exhaust ports enlarged to increase the breathing capabilities of the Renesis engine just like the Street-Port but in addition to this the Auxiliary Ports are bridged which means further power increases over the Street-Ported engine but still retaining all the driving characteristics of the Street-Port. The Aux Bridge comes into play at 6250rpms when the Auxiliary Port (APV) opens, giving you more power all the way to redline!
All RRP rebuilt engines come with a 20,000 mile 12 month warranty as standard which can be extended for a further 12 months.
Parts replaced as standard with this build are:
- 6 x OEM Apex Seals
- 12 x OEM Apex Springs
- 12 x OEM Sideseals
- 12 x OEM Sideseal Springs
- 12 x Two Piece OEM Corner Seals
- 12 x OEM Corner Springs
- 12 x Rotor Inner, Outer, Scrapper Springs
- 2 x OEM Needle bearings
- 1 X Pilot Bearing
- 2 X OEM Stationary Bearings
- 2 X Bearing Retaining Screws
- 2 X OEM Rotor Bearings
All necessary seals and gaskets will be replaced
Want something more bespoke? Why not look at our engine build configuration tool and configure you own options and then purchase online!
Engine Build Configuration Tool
Engine only: £2,125 Incl VAT.
Fully fitted service £2,625 Incl VAT.
Bridge Port Stage 2 (Half-Bridge)
The Bridge-Port Stage 2 engine rebuild commonly known as a Half-Bridge has its inlet and exhaust ports enlarged to increase the breathing capabilities of the Renesis engine just like the Street-Port, but in addition to this, the Auxiliary and Secondary Ports are bridged.
The Half-Bridge retains stock idle characteristics but power and torque are increased significantly over the middle and upper rev ranges. The Half-Bridge comes into play between 3800-4200rpms when the Secondary Port (SSV) opens, giving you more power all the way to redline!
All RRP rebuilt engines come with a 20,000 mile 12 month warranty as standard which can be extended for a further 12 months.
Parts replaced as standard with this build are:
- 6 x OEM Apex Seals
- 12 x OEM Apex Springs
- 12 x OEM Sideseals
- 12 x OEM Sideseal Springs
- 12 x Two Piece OEM Corner Seals
- 12 x OEM Corner Springs
- 12 x Rotor Inner, Outer, Scrapper Springs
- 2 x OEM Needle bearings
- 1 X Pilot Bearing
- 2 X OEM Stationary Bearings
- 2 X Bearing Retaining Screws
- 2 X OEM Rotor Bearings
All necessary seals and gaskets will be replaced
Want something more bespoke? Why not look at our engine build configuration tool and configure you own options and then purchase online!
Engine Build Configuration Tool
Engine only: £2,275 Incl VAT.
Fully fitted service £2,775 Incl VAT.
Bridge Port Stage 3 (Full Bridge)
The Bridge-Port Stage 3 engine rebuild or Full Bridge as its commonly known has its inlet and exhaust ports enlarged to increase the breathing capabilities of the Renesis engine just like the Street Port but in addition to this, all inlet Ports are bridged. This is an aggressive porting option which will substantially increase the power of your Rx8. The Full-Bridge also provides you with that iconic “Rotary Brapping” sound at idle which turns heads wherever you go!
To get the best from this rebuild a full mapping session is highly recommended once the engine is fully run in.
All RRP rebuilt engines come with a 20,000 mile 12 month warranty as standard which can be extended for a further 12 months.
Parts replaced as standard with this build are:
- 6 x OEM Apex Seals
- 12 x OEM Apex Springs
- 12 x OEM Sideseals
- 12 x OEM Sideseal Springs
- 12 x Two Piece OEM Corner Seals
- 12 x OEM Corner Springs
- 12 x Rotor Inner, Outer, Scrapper Springs
- 2 x OEM Needle bearings
- 1 X Pilot Bearing
- 2 X OEM Stationary Bearings
- 2 X Bearing Retaining Screws
- 2 X OEM Rotor Bearings
All necessary seals and gaskets will be replaced
Want something more bespoke? Why not look at our engine build configuration tool and configure you own options and then purchase online!
Engine Build Configuration Tool
Engine only: £2,425 Incl VAT.
Fully fitted service £2,925 Incl VAT.