RRP Low Mount Turbo Kit Full MKII – Mazda RX-8 2004-08 – Coming June/July 2026

Description

RRP Low Mount Turbo Kit Full MKII – Mazda RX-8 (2004-2008) – Coming Soon

The Ryan Rotary Performance (RRP) Low Mount Turbo MKII Full Kit is the complete low‑mount turbo solution for the RX‑8—engineered so you can simply install the kit add your chosen ECU and software, and then drive. After extensive design, development, and real‑world validation, we’ve created a no‑compromise package built entirely around the RX‑8 platform.

This system delivers a true bolt‑on experience. Every major component is bespoke, designed specifically for the RX‑8 rather than adapted from generic turbo hardware. Despite the RX‑8 never being intended for forced induction, the MKII kit requires minimal modification which was one of our major design constraints.

The kit provides everything you need *mechanically see FAQ’s for might be required as an additional requirement.

Turbo Selection:

At the heart of the kit is the Xona Rotor XR7864S Turbo, Xona Forged a long standing relationship, TiAL Sport and FP Turbo and have since worked together to form XONA ROTOR. Xona Rotor’s mission is to set a new standard for quality and performance for turbochargers being offered to motorsports and performance markets and have become a premium brand. We could have selected cheaper turbo alternative but this is the heart of the system and where in our opinion there should be no compromise.

Key Features:

• 78LB/Min HTZ Compressor Wheel
• 72/64MM Turbine Wheel
• 78LB/Min HTC Compressor Wheel
• Dual Ceramic Ball Bearing
• Billet Stainless Steel Lightweight Bearing Housing (V- band 1,03)

Turbo Manifold, Downpipe & Wastegate:

Our billet stainless steel turbo manifold, designed to accommodate this turbo, the largest low mount turbo yet released on a low mount kit for the Rx8.

• CNC‑machined from 304 stainless steel for precision and durability;
• Internal geometry optimised to maximise exhaust gas flow;
• Integrated mounting provision for  supplied 45mm external wastegate;
• Designed around the Xona Rotor XR7864S Turbo;
• The downpipe is beautifully constructed from SS304 with a premium exhaust bellow to allow for some flexibility;
• For this application we have selected the Turbosmart GenV WG45 CompGate45 14psi external wastegate to control boost. It is strongly recommended to install no more than the 11PSI spring without further supporting modifications. 

The Intercooler:

Our stunning RRP intercooler, with a custom core from the well renowned Pro Alloy and perfectly fabricated by Inspired Motorsport, a work-of-art piece that integrates seamlessly with OEM bumper mounting points for effortless installation.

This is a true OEM‑plus solution:

• Direct fitment using factory mounting points;
• Integrated toe‑thread support;
• Rated for up to 400 HP airflow capability;
• RRP kit supported to 11 PSI spring pressure, yielding 330–350 HP in typical setups, although the turbo itself could support more; it will require substantial amount of work and an engine rebuild to support that increase.

For power levels beyond this, additional upgrades outside the scope of this kit will be required.

Hardware:

further support elements in this kit include the RRP right engine mount bracket, along with a right specific RRP engine mount (those that already own RRP engine mounts can be provided with just the new insert).

The included boost and intake piping is precisely sized to complement the OEM intake system while maximizing flow efficiency from the selected turbo.

Pair this support kit with your choice of engine control and sensors to complete your project.

Kit Contents:

• Xona Rotor XR7864S Turbo 
• RRP Turbo Manifold – Billet Stainless Steel 304;
• Turbosmart GenV WG45 CompGate45 14psi external wastegate;
• Billet Turbo Recirculation Valve;
• RRP– Right Side Engine Support Bracket;
• RRP– Right Side Engine Mount;
• ITG Maxogen Filter –  JC60 Full Cone – 78mm Neck ID
• RRP Intercooler – Custom-designed with integrated toe thread and OEM bumper supports;
• 63mm Boost Pipe – From turbo to intercooler;
• 76mm Boost Pipe – From intercooler to OEM intake;
• 78mm Turbo Intake Piping; 
• Oil Feed and drain lines;
• Water feed lines – (a full black silicone hose kit will be provided as part of this kit).
• High-quality silicone couplers with worm drive clamps.

Note: This kit ships in a raw aluminum finish (ideal for custom powder coating or anodising).

Further information:

Low Mount Turbo – Ryan Rotary Performance

FAQ’s

What will I need to finish off the install?

You will require an aftermarket ECU such as the Haltech Rx8 PNP with 02 control &  Air temperature sensor.

You’ll also need to modify the OEM to accept an oil return from the turbo, or simply purchase the RRP Billet Sump.

Is the kit suitable for both RHD & LHD vehicle’s?

Yes the kit works for both LHD & RHD vehicles.

Do you need to relocate the battery for this kit? 

If you wish to keep the OEM battery this will need to be relocated, there is room in the original location for a smaller or lithium battery.